IT series is a professional SATA HDD duplicator, specially designed for high-volume duplication. U-Reach adopted a unique multitasking technology, it can simultaneously copy 7 HDD targets with a high transfer speed of 18GB per minute.
We guarantee the highest productivity without speed degradation even as the number of targets increase. The IT series SATA HDD duplicator provides four copy modes: quick smart copy, all partitions copy, percentage copy and whole HDD copy that all meet different duplication task requirements. The quick copy mode copies data and skips blank area. NTFS, Linux (Ext2/Ext3/Ext4), FAT (16/32/exFAT), and Mac (HFS, HFS+, HFSX) formats are all supported with quick copy mode.
In addition, the IT series SATA HDD duplicator is equipped with different levels of secure erase functions, Quick Erase, Full Erase, DoD 5220 Erase government standards and Secure Erase which can fulfill different levels of security for HDD wiping.
Impeccable High Speed
U-Reach Ultra High-Speed IT Series SATA3.0 HDD/SSD duplicator is capable of copying at 30 GB/m on all targets simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.
Intelligent Duplication Modes
U-Reach Ultra High-Speed SATA3.0 HDD/SSD duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand
Illustration of Copy Modes
The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive's controller chip.
1. Quick Erase: Erase HDD index table, and only takes A FEW SECONDS to complete
2. Full Erase: Erase the complete HDD
3. DoD Erase: Complies with the U.S. Department of Defense's standard of erasing.
4. Secure erase: A National Institute of Standards and Technology (NIST 800-88) accepted technique for properly purging hard drives. This method is supported by almost all modern SATA HDD.
- Quick copy mode supports Windows (FAT16/32/64), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX) formats.
- Whole media copy mode supports all system and proprietary formats.
- Supports various brands.
- Designed to support 18TB+ capacities.
- Supports MBR and GPT partitioning.
Auto Rejection of Slow Devices
Ultra High-Speed IT Series SATA3.0 HDD/SSD duplicator enable end-users to set the minimum writing speed threshold. This feature was developed to prevent and to eliminate problematic devices that halts the duplication and sanitizing process.
Double Data Verification: Compare + CRC Checksum
U-Reach duplicators makes straightforward copies, but it is imperative that the copied data are verified through a bit-by-bit process, this will ensure successful copied and reduce customer recalls.
Skipping Bad Sectors
End-users are given options to skip bad sectors from the source device. Access the function to select the numbers of bad sectors to skip, from 0 through unlimited.
Optional Adapters Supported
Event Log Report
U-Reach HDD/SSD duplicators has an unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each devices completely. It is an important asset for production management and analysis.
Real-Time PC Monitoring
It is absolutely perfect for MONITORING the work progress during operation. It shows all the information for EVERY PORT, which is a powerful tool for sorting out the lagging writing HDD and keeping the operation efficient. All the information you need will be shown on a PC screen.
IT300U, IT700U, IT1500U
1:3, 1:7, 1:15
30GB/min. (500MB/sec.) *Actual performance is dependent on HDD transfer rates.
Stand-alone, non PC-based operation
Copy Modes: All Partitions/Whole HDD/Percentage copies all types of formats, both known, and unknown.
Backlit Monochrome LCD Display
3 LED Indicators per Port:
4 Push Buttons(▲, ▼, OK, ESC)
Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy
Manually set (Bad sector) threshold range to skip during copy process
Bit-by-bit hardware-accelerated data comparison
Quick Erase, Full Erase, DoD Erase, and Secure Erase
Real-time status monitoring through PC
Monitor real-time recordings and Log Reports via PC-Link
All (Windows, Linux, and other stand-alone systems)
Supports MBR, GPT, and Advanced formats.
Adjustable voltage 115V-240V, 50/60Hz
Working: 5°C ~ 45°C; Storage: -20°C ~ 85°C
Working Humidity: 20% ~ 80%; Storage Humidity: 5% ~ 95%
FCC, CE, RoHS
IT-U Series Professional SATA III (30GB/min) Duplicator
High-Speed Hard Disk(HDD) /SSD Duplicator
- Speed transfers of up to 30GB per minute.
- Systems & files copy mode supports Windows (FAT16/32/exFAT, NTFS),Linux (ext2/ext3/ext4), Mac (HFS, HFS+, HFSX.)
- Data Sanitization: quick erase, DoD erase, and secure erase.
- Real-Time PC Monitoring.
- Log report management records all task details for better production management.
- Cable free connection for easier HDD insertion & removal.
3 versions 3-15 targets
IT300U, IT700U, IT1500U
Ask about our products now
Other products in this range: